Printing

On-demand 3D printing

Process and material are separate choices. FDM fleet: Bambu Lab H2C, H2D and H2S. Pricing for each part is set in the quote.

Technologies

  • FDM

    Filament. Suited to functional parts, enclosures, jigs and fixtures, and mechanical prototypes. Layer lines are visible — that is the process. Multi-material (Dual Print) and CoreXY for short lead times.

  • SLA

    Photopolymer resin. Suited to fine detail, tight fits and small parts. Not every resin is meant for long-term mechanical use.

FDM fleet

Five printers from the leading series. Official H2-series motion accuracy:

  • Bambu Lab H2C up to 0.05 mm
  • Bambu Lab H2D up to 0.05 mm
  • Bambu Lab H2S up to 0.05 mm

0.05 mm per Bambu Lab, with the Vision Encoder. This is motion-system accuracy, not a guaranteed tolerance for every part. Dimensional accuracy depends on material and geometry — we detail it in the quote. SLA is a separate route.

Materials

Price per material: by quote. Pricing depends on the part, quantity and material, and appears in the written quote.

PLA

FDM

Easy choice for visual prototypes. Heat-sensitive.

By quote

ABS

FDM

More heat-resistant than PLA. Good for enclosures.

By quote

ASA

FDM

Like ABS, but UV- and sun-resistant. For outdoor parts.

By quote

Nylon

FDM

PA filament — not powder-bed SLS.

By quote

PETG

FDM

Everyday filament for general-purpose parts.

By quote

PETG-CF

FDM

As easy as PETG, stiffer, matte finish.

By quote

PC

FDM

Polycarbonate. Heat and impact.

By quote

PLA-CF

FDM

Carbon-fiber PLA. Stiff, more brittle.

By quote

PA-GF

FDM

Glass-fiber nylon.

By quote

TPU

FDM

Flexible. Seals and shock absorbers.

By quote

PVA

FDM

Water-soluble support. Not for end-use parts.

By quote

Nylon + carbon

FDM

Carbon-fiber reinforced nylon. Mechanical stability and high temperature resistance.

By quote

Photopolymers

SLA

Resin. The resin type is specified in the written quote.

By quote

Filament properties

UV, chemical and heat columns come right after the material name. On narrow screens, scroll sideways.

Material UV resistance Chemicals Part heat resistance (°C) In short Tensile strength (MPa) Stiffness / modulus (GPa) Impact strength (kJ/m²)
PLA Weak Acetone destroys it. Water and alcohol weaken it. 50–60 Easy to print, almost no shrinkage. Good for prototypes. 50–70 3.0–3.5 2.0–5.0
PLA-CF PLA + carbon fiber Weak Like PLA. Not for chemicals. 50–65 Stiffer than PLA, more brittle under impact. Abrasive to nozzles. 45–70 5.0–8.0 2.0–6.0
PETG Moderate Water and weak acids OK. Not acetone. 65–75 Balance of strength and durability, low shrinkage. 45–55 2.0–2.4 6.0–12.0
PETG-CF Moderate Like PETG. Water OK, not acetone. 70–85 As easy as PETG, stiffer, matte finish. 55–70 4.5–5.5 5.0–8.0
ABS Weak Oils OK. Acetone dissolves it. 85–100 Impact- and heat-resistant. Needs an enclosed chamber, high shrinkage. 35–45 1.8–2.2 15.0–30.0
ASA Good Water, weak acids. Acetone dissolves it. 90–100 Like ABS, more resistant to UV and sun. For outdoor parts. Enclosed chamber. 40–50 2.0–2.3 12.0–30.0
Nylon (PA) Weak Good with oils and fuels. Not acids. Absorbs water. 70–90 Strong and tough, high impact resistance. Absorbs moisture — printed dry. 60–80 1.5–2.5 20.0–40.0
PA-CF nylon + carbon fiber Weak–moderate Like nylon: good with oils and fuels, not acids. 150–190 Nylon strength + carbon stiffness, almost no shrinkage. Abrasive — needs a hardened nozzle. 80–120 6.0–8.5 8.0–12.0
PA-GF nylon + glass fiber Weak–moderate Like nylon: good with oils and fuels, not acids. 150–180 Stiff and stable like PA-CF, slightly heavier. Abrasive to nozzles. 70–110 5.0–8.0 8.0–15.0
PC polycarbonate Moderate Water and weak acids OK. Not acetone. 110–130 Engineering material: heat and impact. Needs a heated chamber. 55–70 2.0–2.4 20–40
TPU Weak–moderate Good with oils and grease. Alcohols and ketones cause swelling. 60–80 Flexible. Seals, shock absorbers, covers. 20–50 0.05–0.3 Flexible
PVA — Dissolves in water. No chemical resistance. — Water-soluble support. Not for end-use parts. — — —
Photopolymers SLA / resin Weak Depends on the resin. Standard resin yellows in sunlight. 40–80 Detail and tight fits. Resin type stated in the written quote. 30–60 1.5–3.0 5–25

Typical values, not an order specification. Heat resistance is the HDT of the printed part (not the print temperature). UV and chemical ratings are rules of thumb for a porous FDM part, not a lab certificate. Acetone attacks ABS/ASA. PVA dissolves in water. The written quote specifies the exact material. Pricing by quote.

Pricing comes in a written quote, after we have checked the geometry.

At the print farm

FDM (Bambu Lab H2C, H2D, H2S) and SLA. The materials listed above are our standard range.

Not at the farm

Metal printing is not part of the service. The farm specializes in FDM engineering plastics and SLA resins.

Send a file for a quote